У меня есть виртуальная машина, которую я использую для общего доступа к Samba дома. Он хранит данные в общей папке с хост-компьютера. Как на хосте, так и на гостевой машине общее и доступное пространство для этого конкретного (и других) диска отображается правильно. Хост и гостевые машины работают под управлением Debian 11.

Однако, когда я пытаюсь скопировать файлы на общий ресурс samba со своего ноутбука, он говорит, что свободно только 16 ГБ (против 1,4 ТБ на самом деле бесплатно), и я вынужден использовать FTP-соединение. Ноутбук работает под управлением Ubuntu 20.

Все, что я мог попробовать, это то, что я нашел на stackechange, в котором упоминалось о добавлении этих двух строк в конфигурацию.

   dfree command = /usr/local/samba/bin/dfree
   allocation roundup size = 4096

Что я и сделал, но безуспешно.

Ниже мой файл smb.conf, если нужно.

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

   dfree command = /usr/local/samba/bin/dfree
   allocation roundup size = 4096
## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
   interfaces = enp0s9

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine iss: cannot access '/usr/local/samba/bin': No such file or directory

Root@GC01fileSRVR:~$

# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
   logging = file

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap config * :              backend = tdb
;   idmap config * :              range   = 3000-7999
;   idmap config YOURDOMAINHERE : backend = tdb
;   idmap config YOURDOMAINHERE : range   = 100000-999999
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 means that usershare is disabled.
#   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

[MediaServer]
   comment = Home Directories
   browseable = yes
   path = /media
   guest ok = no
   read only = no
   create mask = 0600
   directory mask = 0700
   security = user
   encrypt passwords = yes

Бег

ls /usr/local/samba/bin

Возвращается

ls: cannot access '/usr/local/samba/bin': No such file or directory

Бег

whereis samba

Возвращается

samba: /usr/sbin/samba /usr/lib/x86_64-linux-gnu/samba /etc/samba /usr/share/samba /usr/share/man/man7/samba.7.gz /usr/share/man/man8/samba.8.gz

Некоторые журналы:

[2021/11/21 15:21:23.198342,  2] ../../source3/smbd/reply.c:747(reply_special)
  netbios connect: local=192.168.1.159 remote=gc01pc, name type = 0
0
giovi321 21 Ноя 2021 в 17:23
У вас есть /usr/local/samba/bin/dfree? Я бы сказал, что это маловероятно
 – 
roaima
20 Ноя 2021 в 02:12
-bash: cd: /usr/local/samba/bin/dfree: No such file or directory не существует, должен ли я просто touch его?
 – 
giovi321
20 Ноя 2021 в 15:38
Не пытайтесь перейти на него как на каталог; это файл, так что действие никогда не может работать. Используйте ls /usr/local/samba/bin и сообщите, что находится в каталоге, или сообщение об ошибке. Измените свой вопрос, чтобы включить результаты, пожалуйста.
 – 
roaima
20 Ноя 2021 в 17:04
Этот каталог не существует
 – 
giovi321
20 Ноя 2021 в 21:00
В порядке. Спасибо за проверку. Это означает, что ваше предложение использовать dfree ничего не могло сделать. Какая именно версия Samba у вас установлена?
 – 
roaima
20 Ноя 2021 в 22:44

1 ответ

Лучший ответ

Проблема решена. Общий ресурс samba указывал на /media, который содержал две общие папки virtualbox на двух разных дисках, поэтому samba не могла рассчитать, сколько места осталось на одном диске и на другом диске.

0
giovi321 24 Ноя 2021 в 02:28